* Hold mousbutton and move to rotate. Hold right right mouse button amd move to pan. Use mouse wheel to zoom.

Description

This is another Prusa i3 LCD holder. The LCD display (from RepRap Discount) is installed horizontally leaving free the top of the printer. It can be installed either on the left or the right. One of the LCD holders has a slot for the SD-card.

You will need:
- 1 x 23 cm (9") 8 mm or 5/16" threaded rod
- 5 x 8 mm or 5/16" nuts
- 6 x M3 (4-40) x 2 cm (3/4") bolts
- 6 x M3 (4-40) nuts
- 4 x M3 or (4-40) washers
- The plastic parts
- a zip tie (optional)

Mount it as shown on the pictures. A zip tie is installed to prevent the LCD from vibrating. You do not need to drill holes in the frame to install this holder.

Embed
Discuss this model in the 3D-Printing-Community