MORE PRINT VOLUME:
- Increased the lateral separation of 234 mm to 250 mm.
- It has moved 10 mm heated platform down.
- The resulting print volume depends on the platform and the extruder that we place but you can easily get a size bigger than 190 x 190 x 100 mm.
- The thickness of the acrylic has risen to 6 mm.
- The introduction of a crosspiece to give more rigidity.
- In the attachment points of the rods can be placed brimmed washers (DIN9021).
DESING MADE CONSIDERING THE WIRING:
- The electronics is on the left side of the printer, it is placed horizontally to get the cable up coming from above.
- Parts acrylic have holes or slots provided for wiring.
Like last time, the magnificent infographics have been made with Cinema 4D + VRay by PIKELO.
SPANISH VERSION AT: